previous arrow
next arrow
Full screenExit full screen
previous arrownext arrow



Designed for higher pressure cleaning requirements, the ODC HP tank cleaning machine provides an alternative to the low pressure options most commonly available from ODC. This hard hitting unit will easily remove even the most stubborn stuck-on dirt while the low flow rate will keep cleaning product costs low.

  1. Durable, low-maintenance stainless steel construction
  2. Optimized mechanical design creates a water jet with greater impact
  3. Four nozzle sizes available
  4. Low flow volume
  5. Thoroughly cleans the entire tank interior (360°)
  6. Lubricated and driven by the cleaning fluid
  7. Uses a dynamic seal to decrease leakage and save cleaning fluid, only allowing up to 1.0% leakage
  8. Designed to make it very difficult to clog


This tank cleaner provides a powerful and thorough 360-degree cleaning pattern using two nozzles to blast the tank walls and wash all surfaces. A rotor is driven by the cleaning fluid which drives the internal deceleration components to create a full 3-dimensional rotation spray pattern with higher pressures.

A full cleaning cycle lasts approximately 6-12minutes. Required fluid volume varies with nozzle diameter, pressure and cycle time.


Due to the low fluid volumes consumed, the ODC HP series is especially useful in mobile cleaning requirements including vessel cleaning tasks using combo trucks and hydrovac trucks. Effective for use in tank cleaning and for cleaning vessels during production facility shut-downs, this tank cleaning machine is very versatile and is easily deployed across many industries including oil and gas, chemical, and many others.


Minimum Opening: 5″ (126 mm)

Pressure: 30 – 3,200 psi (20 – 220 bar)

Flow Rate: 3 – 21.13 GPM (11.35 – 79.98 LPM)

Diameter: 13 ft (4 m)